1) How much does a new fence cost in Texas?
Fence pricing depends on material (cedar vs pine vs metal), fence height, total linear feet, terrain, how many gates you need, and demolition of an old fence. For an accurate estimate, we measure the property line, confirm fence style, and check for access or slope issues. The fastest way to get a ballpark is to send photos and your approximate linear footage.
2) What’s the best wood for fences in Texas — cedar or pine?
Cedar is the most popular because it naturally resists rot and insects and holds up well in Texas heat. Pine can be more budget-friendly but typically needs proper sealing/staining and good installation practices to maximize lifespan. We’ll recommend the best option based on your budget, sunlight exposure, and how long you want the fence to last.
3) How long does fence installation take?
Most standard residential fences can be installed in 1–3 days, depending on linear footage, number of gates, and weather. Larger properties, difficult terrain, or custom builds may take longer. We’ll provide a project timeline before work begins.
4) Do I need a permit to build a fence?
Sometimes. Permit requirements vary by city and by fence height (and corner-lot visibility rules). HOAs may also require approval for style and stain color. We can help you understand what your city/HOA typically requires before we install.
5) Where exactly will the fence be installed — and who confirms the property line?
Homeowners are responsible for confirming property lines. If there’s any uncertainty, we recommend a survey or marking known boundary points before installation. We build based on your confirmed boundary to avoid neighbor disputes later.
6) How deep should fence posts be set?
Post depth depends on fence height, soil type, and local conditions. Deeper, properly-set posts help prevent leaning and movement over time. We focus on solid post installation because it’s the foundation of a long-lasting fence.
7) Why do fences lean or fall over?
Common causes include: shallow posts, poor concrete setting, soft/wet soil, rot at the base, storm winds, or damaged rails/pickets. In many cases, we can correct the issue with post replacement, resetting sections, and reinforcing gates.
8) Can you repair a fence instead of replacing it?
Yes — if the posts are still structurally sound, many fences can be repaired by replacing damaged pickets/rails, resetting sections, and installing new hardware. If multiple posts are rotted or leaning, a partial rebuild or replacement may be more cost-effective long-term.
9) Do you repair storm or wind-damaged fences?
Yes. We can repair or rebuild damaged sections, replace posts, and rehang gates. If you’re filing an insurance claim, take photos right away and keep any documentation from adjusters. We can provide a detailed estimate for repairs.
10) How do I know what style of fence is best for my home?
We help you choose based on privacy needs, budget, neighborhood requirements, and design preference. Popular styles include:
• Privacy fence
• Board-on-board
• Horizontal
• Cap & trim
• Metal/iron
We can show examples and recommend what performs best for your situation.
11) How many gates should I add — and where?
Most homes benefit from at least one walk gate and one drive gate (if alley access or backyard equipment storage is needed). Gate placement depends on how you use the yard (trash bins, lawn equipment, pets, pool access, etc.). We’ll help you plan for convenience and security.
12) Why is my gate sagging?
Gate sag is usually caused by settling posts, undersized framing, worn hinges, or improper bracing. We can straighten and reinforce gates, replace hinges/latches, and reset posts if needed so the gate swings and latches correctly.
13) Should I stain or seal my fence — and when?
Staining/sealing protects wood from sun, moisture, and cracking. In general, it’s best to stain after the wood has had time to dry appropriately. Timing can vary depending on the type of wood and weather. We can recommend the right schedule and product for your fence.
14) What’s the difference between staining and painting a fence?
Stain penetrates the wood and helps it breathe while providing protection and color. Paint sits on top of the wood and can peel or trap moisture if not applied correctly. For most Texas fences, a quality stain/sealer is the preferred long-term option.
15) How often should a fence be stained in Texas?
Maintenance depends on sun exposure, product used, and how the fence was prepped. Many homeowners re-stain every few years. The best way to extend life is proper prep, quality stain, and regular inspection for rot or loose boards.
16) Do you remove and haul off old fencing?
Yes — we can remove and dispose of old fence material as part of the project. Demo/haul-off is typically priced based on linear footage and ease of access.
17) Can you match my neighbor’s fence (shared fence line)?
Often yes, especially for shared side fences. Matching height and style helps keep the neighborhood consistent. We’ll also confirm HOA/city requirements to ensure compliance.
18) Do you offer free estimates?
Yes. We offer free estimates and can often provide a fast ballpark if you send photos, your address/city, and an approximate linear footage.
19) Are you insured?
Yes — Renew Fence & Construction is insured. If you’d like, we can provide proof of insurance upon request.
20) What areas do you serve?
We serve Rockwall, Sunnyvale, Prosper, Highland Park, and Lake Highlands, plus nearby areas in the Dallas–Fort Worth metroplex. If you’re just outside these areas, message us and we’ll let you know if we can take the project.
